| Customization: | Available |
|---|---|
| Type: | Flat Gasket |
| Material: | Stainless Steel |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
For more details and any other questions
Pls click here to send INQUIRIES for us
For sealing water,steam,inert gas,weak acid and alkali and general chemical.
Sealing fuel,oil-based lubricant,such as motorcycle engine,general machinery engine and automobile engine and petrochemical
products.
Advantages:
Compared with the other kinds of gaskets,this one is soft and flexible with advanrages of better joint to flange and no corrosion,
Size:
3810x1270x(0.5~6.0)mm,2000x1500x(0.5~6.0)mm,1250mmx1250mmx(0.5~0.6)mm,
1500x1500x(0.5~6.0)mm,1500x1350x(0.5~6.0)mm,1500x1350x(0.5~6.0)mm
Product Description:
Sprial wound gaskets are winding by "V" shaped metallic strip and soft non-metallic filler.According to the requestment,the gaskets can
be within inner and outer rings for improving the gaskets handling,fitting and versatility,
Depend on its excellent compresion resilience,it's suitable for sealing spots where the alteration of temperature and pressure are frequently.
Basic type:
Basic type gasket:inner and outer diameters are reinfoced with several piles of metal without filler to give greater stability and better compression
characterics.
Suitable for tongue and groove,male and female or grooved to flat face flange essemblies,inner .
Ring type:
Solid inner metal ring acts as a compression stopper.To prevent accumulation of solids,reduce trubulent flow of process fluids and minimize
erosion,damages of gasket between flange bore and the inside diameter,the annular space is filled up by solid inner metal ring,suitable for male
and female pipe flanges.
Outer Ring type:
Solid outer accurately locates the gasket on the flange face to give the additional radial strength to prevent gasket blowout and acts aas a compression limiter.In case of installing the outer ring,it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts.
Suitable for use with flat face and raised face flanges,For class 900 and above an internal ring is recommended.
Inner&Outer Ring Type:
An inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side.
It will prevent the corrosions on flange face at annular space.
Suitable for use with flat face and raised face flanges and specified for high pressure and temperature service,class 900 and above or where corrosive or toxic media are present.
| Item | XB510 | XB450 | XB400 | XB350 | XB300 | XB250 | XB200 | XB150 |
| TemperatureºC | 510 | 450 | 400 | 350 | 300 | 250 | 200 | 150 |
| Pressure(Mpa) | 7 | 6 | 5 | 4 | 3 | 2.5 | 2 | 1.5 |
| Tensile Strenth(Mpa) | 18 | 16.5 | 15 | 14 | 12.7 | 9 | 8 | 6 |
| Compressibility(%) | 7-17 | |||||||
| Recovery(%) | 50 | 45 | 35 | 25 | ||||
| Density(g/cm³) | 1.92 | |||||||
| Thickness(mm) | 0.5mm~10mm | |||||||
|
|
|
|
|
|
){kind=link}